Features:
1. Infrared Motion Trigger Digital Trail Camera
2. Captures high quality pictures and records HD video clips 1080P
3. Store pictures / videos in 32GB TF card. (NOT included).
4. Three mode: camera, video, camera+video.
5. Date, time, temperature and moon phrase stamp on each picture.
6. Sending picture via 2G GSM MMS or GPRS; Four bands: 850/900/1800/1900MHZ.
7.Russia, Danish, Dutch, Polish, English, French, Deutsch, Spanish, Portuguese,Swedish, Italian, Finnish and Polish supported.
It can be triggered at once by any movement of human (or animals), take 16MP photo and 1080P video by infrared sensor
|
Image Sensor |
8 Mega Pixels Color CMOS |
|
Memory |
TF Card to 32GB(NOT INCLUDED) |
|
Lens |
F=3.1; FOV=120 ° |
|
Size |
145mm * 80mm * 55 mm |
|
IR-cut |
Full Automatic IR Filter |
|
Display |
2.0 inch |
|
PIR Detect Angle |
120 Degrees |
|
Night Vision Range |
65ft/20meters |
|
IR LED |
24 IR LEDs |
|
PIR Distance |
65ft/20 meters |
|
Trigger Time |
0.5second |
|
PIR delay |
1/5/10/30sec/min (default 1 sec) |
|
Image resolution |
16MP/12MP/8MP |
|
Multiple shot |
1/3/6/9 |
|
Video Resolution |
1080P/720P/WVGA/VGA |
|
File Format |
JPEG/AVI |
|
Selectable Image Resolution |
Yes |
|
Multiple Photo on one detection |
Yes |
|
Password Security |
4 digital PIN code |
|
Frequency Bands |
2G GSM 850/900/1800/1900 MHz |
|
Remote Control |
SMS |
|
GPRS transmission |
Data transfer by email |
|
MMS to phone |
1-4 phone number |
|
MMS to e-mail |
1-4 email address |
|
standby power consumption |
0.2mA |
|
Max Standby time |
6Months (8X AA) |
|
Interface port |
USB 2.0; TF Card Holder; 9V DC External |
|
Accesories |
Belt |
|
Working temperature |
-30 ~+70℃ |
|
Power |
8×AA battery(NOT INCLUDED) |
|
Waterproof |
IP65 |
|
Certificate |
FCC,CE,RoHS |
|
mode |
Camera/Video/Camera&Video/Timelapse |
Packing list
1 X Digital Camera
1 X Wireless Remote Control
1 X USB Cable
1 X Antenna
1 X Belt
1 X CD
1 X Manual
Note:
- Please insert the TF card when the camera is power off.
- Please do not insert or take out the TF card when the camera is power on.
- Recommended formatting the TF card by the camera when used at the first time.
- The camera will be in USB mode when connected to a USB port of a computer. In this case, the TF card function as a removable disk.
- Please ensure sufficient power when having firmware upgrade, otherwise the upgrade process could be interrupted incorrectly. If any fault occurs after improper upgrading process, the camera may stop function properly.
