BestOutdoorGear

Product parameters

Product Name: 1x photo flatter for 60ed APO

Magnification: 1 x

Material interface: m54x0.75

Target interface: m48x0.75

Camera back intercept: 54.8mm

Maximum back intercept: 72mm

Weight: 165G

The special flat field mirror for 60ed apo designed by SKY ROVER optics is now on the market. The flat field mirror can provide an image circle with a diameter of about 44mm, which can meet the needs of full frame photography. It is connected with the telescope by thread (m54x0.75, when using, it needs to rotate to remove the 2-inch interface on CAA), and it is matched with the image field rotator (CAA) at the end of the focusing tube, so it can meet your composition needs without rotating the primary mirror. At the same time, its mirror body adopts two-section design, and the default factory mode is SLR camera shooting mode. If you use the frozen CCD / CMOS, you can remove the SLR adapter tube, which can provide up to 70.5mm rear intercept, which can basically meet your needs of using the filter wheel / OAG / CCD at the same time. For specific parameters, please refer to the connection diagram provided by us. This time, we provide our theoretical dispersion map for users' reference. Please note that the theoretical dispersion map is not equal to the actual star point, but only obtained by simultaneous exposure under the design reference spectral line. In actual shooting, because the QE of each spectral line is not the same, but also limited by the shape and size of the sensor pixel, exposure time, etc., the star point is generally more ideal than that obtained by the software. Since the specifications of sky Rover 60ed apo telescope are similar to Takahashi fs-60cb, the plane field can also be adapted to FS-60